I see more and more riders using Mecates in both competitive and pleasure trail rides as well as ranch sorting. That means they are using a bosal or a snaffle bit which I think is more benign on the horse, especially for fast paced competition. Sure you can cut a tongue on a snaffle, but you can't get the leverage that you can on a bit with shanks.
For the most part, you can get away with tying the lead rope end of the mecate around your saddle horn or coil up the lead rope and tie it to the saddle using the saddle strings, however when you are in the sorting pen and using roping cattle like Corriente cattle with horns, I think there are some prudent safety considerations to what you do with the lead rope end of the mecate.
The traditional method for carrying the lead rope of the mecate is to make a bite in the rope and tuck it underneath your pants belt or the belt on your chinks or chaps. So if you get thrown from your horse, you have a chance to grab the lead and retain control of your horse, or if you can't grab that end of the mecate, it will pull out from the belt and keep you from being drug as the horse runs away.
The end of the mecate, making a lead rope, is real handy when you dismount as you have a lead to control your horse. On competitive trail rides, points are sometimes given to riders who also carry a halter and lead, usually bridling the horse over a halter and carrying the lead. With a mecate you don't need the halter or lead as you already have something you can lead the horse with while on the ground.
During Ranch Sorting and Team Penning events, I have seen riders configure the lead rope end of their mecate so there is no quick release and if a Corriente gets a horn through the lead, it could a wreck. I've been at the gate during sorting and have disrespectful cows push through a small gap between the panel and my horse and it wouldn't take much for a horn, or a head for that matter, to snag the hanging mecate. The only good news is that it would be exciting.
A common ways to make it less than safe when using a mecate, is to dally the lead end of the mecate several times around your saddle horn. Some people may even clove hitch it around the horn. See the photo below:
Another way is to carry the lead end of the mecate is tucked underneath your belt in the traditional manner, however then flip the mecate lead over the saddle horn to keep it out of the way. This appears to be safe as you still have the quick release under your belt, but horn wrap (especially rubber) will put friction on the rope if a cow gets their horn or head underneath the rope and it won't provide slack fast enough not to cause a wreck. If you do ride this way, you need to remember to move the lead end of the mecate off the horn before dismounting. I often ride with the mecate looped over the saddle horn to keep it out of the way and I'm embarrassed to say I've dismounted more than few times without flipping the mecate off the horn. But I won't get in a pen with cattle with the mecate lead end running over the horn. See photo below.
One more way to riders to carry or secure the lead end of the mecate is to coil it and tie it to the saddle using the front saddle strings - see picture at left. This has the same safety problems as looping it over the saddle horn or tying it to the saddle horn. When I work a horse from the ground I'll often tie up the lead end of the mecate this way, and sometimes after ground work, I'll leave the lead end tied up if I ride, I but won't enter a pen with cattle or otherwise work cows this way.
So really the traditional method for carrying the lead rope of the mecate, making a bite in the rope and tuck it underneath your pants belt or the belt on your chinks or chaps, is pretty much the safest method for most riding with a mecate, just be sure the loop or bite in the rope is small enough so the end of the mecate can't accidentally find it's way into the loop and create a knot. Things won't go good if you come off the horse with that lead knotted to your belt to say the least.
No comments:
Post a Comment